FIRE RETARDANT CABLE COATING (Ablative)
INCA DC6150 is fire retardant cable coating suitable for indoor and outdoor use. The application is for bundle cable, or cable bundle in tray in Industrial conditions. When tested as per IEC 60332-3A with 0.9 mm DFT , the fire spread is less than 95 cm.
Features
- Water base material
- Non-halogenated
- Asbestos free
- High solids
- Remain flexible after cured
- No cable derating
- Water resistants
- Interior and exterior application
- FM approved
Test
- FM Approval Class:3971
- IEEE 383
- IEC60332-3A
- IEEE1202
Application
- Cable, Cable bundle
- Cable tray in indoor and
- out door condition.
FIRE RETARDANT CABLE COATING (Intumescent)
INCA DC310 is fire retardant cable coating, intumescent type prevent flame spread suitable for indoor use. The application is for bundle cable, or cable bundle in tray in Industrial conditions. When tested as per IEC 60332-3A with 0.6 mm DFT , the fire spread is less than 95 cm.
Features
- Water base material
- Non-halogenated
- Asbestos free
- High solids
- Remain flexible after cured
- No cable derating
- Interior application
Test
- FM Approval Class:3971
- IEEE 383
- IEC60332-3A
- IEEE1202
- ASTM E 662
- ASTM D5116
FIRE RESISTIVE PAINT For Wood, Gypsum Board & Interior (Intumescent)
INCA DC333 The expandable fireproof paint in water base for both interior and exterior. DC333 will expand rapidly to be dense foams as a barrier to stop the fire spread effectively. DC333 contents the special Veova latex resin, nanometer inorganic materials and water proofing agent which will affect the anti-dust on the surface of coating layers to maintain the characteristics of coating not be decomposed by water. Of course, non-toxic, environment friendly and smoke spreads limited are the characteristics of DC333
Features
- Applied as a primer to interior surfaces with normal paint as its top coat.
- DC 333 can be top coated with desired finish latex paint to match décor.
- Increase fire resistance ratings of construction material like OSB/Plywood, Gypsum, and Dimensional Lumber
Test
- ASTM E119 (UL 263)
- ASTM D5116
- ASTM E84
- NFPA 286 (UL 1715)
- NIEA R401.21T
- UBC 26-2
- ASTM D5590
FIRE PROOF CHEMICHALS FOR FABRIC
INCA DC68 Interior furniture and synthetic fabrics are the number One contributing factors to fire spread and smoke generation today. DC68 is a water-based fire proofing spray that is non-toxic, hypoallergenic, colorless and absorbent fabric or material.
DC68 Spray to protect retards fire and prevents the spread of flame over the treated area. DC68 reduces smoke generation which increases visibility and the time to escape a fire situation.
DC68 Spray to protect is highly effective when applied to curtains, drapes, carpets and rugs, decorations, paper products, wall paper & coverings, table cloths, or any water absorbent fabric.
DC68 Spray to protect will not affect look, feel or ventilation .
Features
- Spray Method : Lightweight fabrics: Should be sprayed once on each side. Medium and heavy weight fabrics: Should be sprayed two or more times on each side. Allow fabric to dry at least 30 minutes between coats. Dipor
- Rinse Method : All weight fabrics can be dipped or rinsed processed. Totally immerse fabric in solution, allow fabric to stay in solution one or two minutes. Lightly wring or slow spin-dry.
- Drying : Air or force dry. When force drying, temperature should not exceed 275F
Test
- Complies NFPA 720